Purpose The purpose of this assignment is to critically evaluate a practice prob

by | Oct 10, 2021 | Nursing | 0 comments

Purpose
The purpose of this assignment is to critically evaluate a practice problem. This assignment builds on the Week 4 assignment: Translation Science Project. Information used in the Week 4 assignment may be used as the basis for this assignment. The goal of the assignment is to develop a deeper understanding of the practice issue, using continuous quality improvement tools; specifically, a failure mode & effect analysis (FMEA) of the selected practice problem and an Ishikawa (fishbone) cause and effect diagram to analyze, improve, or mitigate related risks. This assignment will allow for the application of the DNP Essential IV sub-competencies through sequential development of workflow steps in relation to a practice problem and promotion of presentation skills. Assignment content supports the professional formation, communication, and dissemination skills relevant to the DNP practice scholar.
This assignment has four components:
first, identify a practice problem stated in PICOT format;
second, conduct a failure mode & effect analysis of the practice problem;
third, develop an Ishikawa (fishbone) cause and effect diagram to analyze, improve, or mitigate related risks
and fourth, create a professional power point presentation with speaker notes for each slide to disseminate this information.
Course Outcomes
This assignment enables the student to meet the following course outcomes:
CO 4: Evaluate the types of healthcare information systems, knowledge-based systems, and patient care technology and the impact on patient safety, quality of care and outcomes measurement. (PO 7)
CO 5: Appraise consumer health information sources for accuracy, timeliness, and appropriateness. (PO7)
Due Date(s)
The assignment title is due by Sunday 11:59 p.m. MT at the end of Week 6. The Late Assignment Policy applies to this assignment.
Total points possible: 250
Preparing the Assignment
Follow these guidelines when completing each component of the assignment. Contact your course faculty if you have questions.
Consider using the same practice problem identified in Week 4: Translation Science Project, including the practice problem, PICOT construction, and background/significance of the problem. Be sure to incorporate faculty feedback from the Week 4 assignment to maximize performance.
2) Review the examples of the Failure Mode and Effect Analysis (FMEA) and Ishikawa (fishbone) Diagram in Week 4, Explore page 2, Evidence-Based Practice: Improving Outcomes.
Use the Week 6 Practice Problem Analysis PowerPoint Template to complete the PowerPoint Presentation. (Links to an external site.)
Use the Failure Modes and Effects Analysis (FMEA) (Links to an external site.) and Ishikawa (fishbone) Diagram template A (Word 2016 or higher) (Links to an external site.) or Ishikawa (fishbone) Diagram template B (Older version of Word) (Links to an external site.) or create your own fishbone diagram addressing the required five areas: (a) people, (b) environment, (c) materials, (d) methods, and (e) equipment to complete these components of the assignment. If you need to update to the current version of Word, click here.
Please submit to the assignment link the completed Week 6 Practice Problem Analysis PowerPoint Presentation with speaker notes for each slide integrating failure mode & effect analysis and fishbone diagrams into the powerpoint answering associated questions. Upload the finished powerpoint with speaker notes to assignment link.
3) Include the following components.
a) Introduction (1 slide)
i) Title of Practice Problem Analysis and Presentation
ii) Student Name
iii) Assignment Title
iv) Professor Name
b) Practice Problem Identification (1-3 slides)
i) State the Practice Problem in PICOT format (1 slide)
ii) Identify all PICOT components
iii) Describe the Background/Significance of the Practice Problem (1-2 slides) (cited)
iv) Identify inclusion criteria for the population
v) Identify exclusion criteria for the population
c) Failure Modes and Effects Analysis (1-2 slides) Identify three steps in the practice problem process with potential breakdown or process gaps
i) Identify at least one potential error that could occur at each of the three process steps (failure mode)
ii) Identify at least one possible cause of failure at each of the three process steps (failure cause)
iii) Identify at least one adverse consequence for each failure identified (failure effect) (see example in course Week 4)
iv) Using a scale of 1-10, rate the likelihood of occurrence of failure at each process step
v) Using a scale of 1-10, rate the likelihood of detection of failure at each process step
vi) Using a scale of 1-10, rate the likelihood of severity or harm if failure were to occur
vii) Calculate the risk profile number (multiply the score related to the likelihood of occurrence of failure x the score related to the likelihood of detection of failure x the likelihood of severity or harm if failure were to occur.
viii) Place completed FMEA form on powerpoint presentation and summarize analysis
d) Ishikawa (Fishbone) Cause and Effect Diagram (1 Slide)
i) Identify people involved in the practice problem
ii) Identify the environment in which the practice problem occurs
iii) Identify the materials used
iv) Identify the methods used
v) Identify equipment used
vi) Summarize cause and effect analysis
e) Conclusion (1 slide)
i) Summarize the purpose and findings of the analysis
ii) Provide and justify the main conclusions
iii) Draw inferences from the quality improvement analysis
f) References (1 slide)
i) Include in-text citations within the PowerPoint
ii) Provide complete matching references in APA format
iii) Includes a minimum of 4 scholarly sources
g) PowerPoint Presentation
i) Uses PowerPoint Template provided
ii) Uses Failure Modes & Effects Analysis Template Provided
iii) Uses Ishikawa Fishbone Cause & Effects Diagram Provided (Version A or B acceptable or create your own diagram addressing required areas)
iv) Presentation includes no more than 14 slides
v) Grammar and Mechanics are free of errors
h) Speaker Notes on PowerPoint Presentation: Create a professional power point presentation of the above components with speaker notes for each slide in which the Practice Problem Analysis is explained
i) Provide clear and easily readable slide presentation
ii) Capture all slide components and answers questions
iii) Present content with legible, comprehensive notes
Rubric
Week 6: NR706: Practice Problem Analysis and Presentation
Week 6: NR706: Practice Problem Analysis and Presentation
Criteria Ratings Pts
This criterion is linked to a Learning OutcomeIntroduction
Requirements:
1. Provides Title of Presentation
2. Introduces Self
3. Identifies Assignment Title
4. Identifies Professor Name
20 pts
Highest Level of Performance
Includes no fewer than 4 requirements.
18 pts
Very Good or High Level of Performance
Includes no fewer than 3 requirements.
16 pts
Acceptable Level of Performance
Includes no fewer than 2 requirements.
0 pts
Failing Level of Performance
Includes 1 or fewer requirements.
20 pts
This criterion is linked to a Learning OutcomePractice Problem Identification
Requirements:
1. States the Practice Problem in PICOT format
2. Identifies all PICOT components
3. Describes the Background/Significance of the Practice Problem (cited)
4. Identifies inclusion criteria for the population.
5. Identifies exclusion criteria for the population
40 pts
Highest Level of Performance
Includes no fewer than 5 requirements.
36 pts
Very Good or High Level of Performance
Includes no fewer than 4 requirements.
32 pts
Acceptable Level of Performance
Includes no fewer than 3 requirements.
0 pts
Failing Level of Performance
Includes 2 or fewer requirements.
40 pts
This criterion is linked to a Learning OutcomeFailure Modes & Effects Analysis
Requirements:
1. Identifies at least one potential error (failure mode) for each of the three process steps.
2. Identifies at least one potential error (failure cause) for each of the three process steps.
3. Identifies at least one potential adverse consequence (failure effect) for each of the three process steps
4. Rate the likelihood of occurrence of failure at each process step
5. Rate the likelihood of detection of failure at each process step
6. Rate the likelihood of severity or harm if failure were to occur
7. Calculates the risk profile number
8. Summarizes FMEA analysis
40 pts
Highest Level of Performance
Includes no fewer than 8 requirements.
36 pts
Very Good or High Level of Performance
Includes no fewer than 7 requirements.
32 pts
Acceptable Level of Performance
Includes no fewer than 6 requirements.
0 pts
Failing Level of Performance
Includes 5 or fewer requirements.
40 pts
This criterion is linked to a Learning OutcomeIshikawa Fishbone Cause & Effects Diagram
Requirements:
1. Identifies people involved in the practice problem
2. Identifies the environment in which the practice problem occurs
3. Identifies the materials used
4. Identifies methods used
5. Identifies equipment used
6. Summarizes cause and effect analysis
40 pts
Highest Level of Performance
Includes no fewer than 6 requirements.
36 pts
Very Good or High Level of Performance
Includes no fewer than 5 requirements.
32 pts
Acceptable Level of Performance
Includes no fewer than 4 requirements.
0 pts
Failing Level of Performance
Includes 3 or fewer requirements.
40 pts
This criterion is linked to a Learning OutcomeConclusion
Requirements:
1. Summarizes the purpose and findings of the analysis
2. Provides and justifies the main conclusions
3. Draw inferences from the quality improvement analysis
20 pts
Highest Level of Performance
Includes no fewer than 3 requirements.
18 pts
Very Good or High Level of Performance
Includes no fewer than 2 requirements.
16 pts
Acceptable Level of Performance
Includes 1 requirement.
0 pts
Failing Level of Performance
No requirements for this section presented.
20 pts
This criterion is linked to a Learning OutcomeReferences
Requirements:
1. Includes in-text citations within the PowerPoint
2. Provide complete matching references in APA format
3. Includes a minimum of 4 scholarly sources
20 pts
Highest Level of Performance
Includes no fewer than 3 requirements.
18 pts
Very Good or High Level of Performance
Includes no fewer than 2 requirements.
16 pts
Acceptable Level of Performance
Includes 1 requirement
0 pts
N/A
N/A
20 pts
This criterion is linked to a Learning OutcomePowerPoint Presentation
PowerPoint Presentation
Requirements:
1. Uses PowerPoint Template provided
2. Uses Failure Mode & Effects Analysis Template Provided
3. Uses Ishikawa Fishbone Cause & Effects Diagram
4. Presentation includes no more than 14 slides.
5. Grammar and Mechanics are free of errors
30 pts
Highest Level of Performance
Includes no fewer than 5 requirements.
27 pts
Very Good or High Level of Performance
Includes no fewer than 4 requirements.
24 pts
Acceptable Level of Performance
Includes no fewer than 3 requirements.
0 pts
Failing Level of Performance
Includes 2 or fewer requirements.
30 pts
This criterion is linked to a Learning OutcomeSpeaker Notes on PowerPoint Presentation
1. Provides clear and easily readable slide presentation
2) Addresses all slide components and questions
3) Presents legible speaker notes supplementing slide content
40 pts
Highest Level of Performance
Includes no fewer than 3 requirements.
36 pts
Very Good or High Level of Performance
Includes no fewer than 2 requirements.
32 pts
Acceptable Level of Performance
Includes 1 requirement.
0 pts
Failing Level of Performance
No requirements for this section presented.
40 pts
Total Points: 250

Categories

Timely Delivery

All papers are always delivered on time. In case we need more time to master your paper, we may contact you regarding the deadline extension. In case you cannot provide us with more time, a 100% refund is guaranteed.

Affordable Prices

Top Quality Papers

We always make sure that writers follow all your instructions precisely. You can choose your academic level: high school, college/university, or professional, and we will assign a writer who has a respective degree.

24/7 Support

Our support agents are available 24/7 and committed to providing you with the best customer experience. Get in touch whenever you need any assistance.

100% Plagiarism Free

Plagiarism is the biggest crime in the academic world. We have strict measures to ensure that all the essay papers are written from scratch to maintain originality and avoid plagiarism.

Professional Writers

We have hired a team of professional writers who provide expert essay help. Most of them are native speakers and PhD holders who are able to take care of any assignment you need help with.

We Protect Your Privacy

Anonymous Communication

We offer nameless communication between clients and writers. We value privacy on both sides.

Secure Payments

We do not collect or store any payment information. The order form is protected using SSL 256-bit encryption.

Personal Data Protection

Your personal information remains private and secure under our comprehensive privacy policy. We strictly follow the rules.

Why Us?

Exceptional quality, professional writers, secure and private, always on time. This is how our clients described their experience working with us. We value our clients above all and strive to uphold the high standards that we have set.

Quality is everything. We make sure that each completed paper that we send is an absolute masterpiece. It is well-written, thoroughly thought out, follows guidelines, has impeccable format and completely original. You can be confident that your paper is one-of-a-kind because we double-check it for plagiarism. Your instructor will be impressed when you turn in your paper.

Quality

Our Team

Wileyscholars.com has special quality assurance team guarantees that all the papers are plagiarism-free and meet the standards or specific requirements of certain academic institutions (these may vary, you know, and they may vary even between different teachers). Upon placing an order, you can communicate with your writer during the entire process and even after it is completed. This ensures a customized service, meeting the exact needs and expectations of any, even the most demanding customers.

Contact Us

support@wileyscholars.com

Get Started

PROVIDING STUDENTS WITH CUSTOM ACADEMIC PAPERS SINCE 2007